How to Mount a Dartboard Cabinet
U-formed sections have screw gaps that you need to quantify to the right stature of 5ft 8inches. In case that your old dartboard get together needs to have its hanging unit supplanted, it would bode well to go for the most present-day hanging pack. The circle style mounting unit disposes of that requirement for spring cuts. Some section clients have detailed that it’s significantly simpler to situate the board perfectly focused utilizing this technique. Width of sections and plates keep your board flush, secure and level. The easiest way accurately measure to the throw line is to use the diagonal measurement. Mount the board first, and check that the 5’8" height is correct. Then hold one end of a tape measure at the Bull, and bring the other end out and down to the floor, so that the diagonal distance is 9 feet, 9-1/2 inches. However there are also specific measurements that tournament sanctioned dartboards must follow as specified by the British Darts Association. This includes the hanging distance, throwing distance, and diagonal distance. So far we’ve listed the dart playing measurements. It might seem trivial, but your dart board height and distance might be off and cause such bad results. Maybe you have given your best and practiced for hours at your home, just to fail big once you start playing at your local pub or a tournament. Try as much as possible to keep your dartboard dry. However, their tightly packed bristles should never get wet. That also implies that you shouldn’t install your dartboard in a damp or in an environment of high humidity. The only exception is for soft vs steel tip darts. Whether you’re hanging an electronic dartboard or a regulation board, these dimensions hold true. In this case, you’ll need to move the throw line back by ¾ inch. Here you’ll find all of the dimensions including distance from the throwline to dartboard and the height from the floor to the bullseye. If you’re trying to hang your dartboard according to Official Dartboard Regulations, this post is the one for you. For instance, if you’re dealing with a steel tip dartboard, the diagonal distance should be 9 feet 7 3/8 inches (2.93 meters) while for the case of a soft tip dartboard, the distance should be 9 feet 9 ½ inches (2.98 meters). Beside above, how thick is a dart board? Other things to remember: Most dart boards are about 1 1/2" thick, so be sure to measure from the front of the board and not the wall. Dart Board- The diameter of the dart board should be a maximum of 18 inches, but is typically 17 3/4".